HT - Setup

Follow the instructions below to set up the 501BN HDMI Switch:

  1. Plug the AC/DC power adapter into the 501BN, then into a free outlet.
  2. Connect an HDMI cable to the Output port of the 501BN, and connect the other end to and input on your TV.
  3. Connect an HDMI cable to the HDMI Output of each video device that you want to connect to the 501BN, then connect the other end to an Input port on the 501BN.
  4. Remove the plastic tab from the battery compartment on the 501BN remote.
The 501BN should now be ready. To test the 501BN, power on the TV and one of the connected video sources, make sure that the 501BN is switched to the video source you'll be using, and make sure an image appears on the TV. If there is no image on the TV, make sure the TV is set to display the Input that the 501BN is connected to, then check to make sure that all HDMI cables are connected firmly to their HDMI ports.

Comments

0 comments

Please sign in to leave a comment.

Powered by Zendesk