How-To

HT - Setup

Follow the instructions below to set up the 350BN HDMI Switch:

  1. Plug the AC/DC power adapter into the 350BN, then into a free outlet.
  2. Connect an HDMI cable to the Output port of the 350BN, and connect the other end to and input on your TV.
  3. Connect an HDMI cable to the HDMI Output of each video device that you want to connect to the 350BN, then connect the other end to an Input port on the 350BN.
  4. Remove the plastic tab from the battery compartment on the 350BN remote.
The 350BN should now be ready. To test the 350BN, power on the TV and one of the connected video sources, make sure that the 350BN is switched to the video source you'll be using, and make sure an image appears on the TV. If there is no image on the TV, make sure the TV is set to display the Input that the 350BN is connected to, then check to make sure that all HDMI cables are connected firmly to their HDMI ports.

Comments

0 comments

Please sign in to leave a comment.

Powered by Zendesk