HT - Install under Windows 10

Please plug your BTD-300/BTD-400 into a USB port on your computer.  Windows will automatically install the required drivers from Microsoft.  Right click the Bluetooth tray icon and choose Add a Device. The USB adapter is ready to be used.

Note: If the simple plug and play does not work, follow the steps below.  It is possible that the computer already has Broadcom (WIDCOMM) Bluetooth software which will need to be removed.
 

1. Be sure the USB adapter is plugged into the usb port on your laptop or computer.
 

2. Uninstall the BTD-300/BTD-400 driver from the Device Manager.

a. Hold down the Windows key, then press the X key.  Select *Device Manager*.

b. Under the Device Manager, locate Bluetooth Radios > BCM2070 or BCM20702

c. Right click the device, and select Properties

d. Navigate to the Driver tab, and click the Uninstall button.  (Be sure to check the box so the driver can be deleted from the computer)

e. Hit OK and close out of the windows when it is complete.
 

3. Unplug the BTD-400
 

4. Uninstall all WIDCOMM and Bluetooth related software

a. Hold down the Windows key, then press the X key.  Select *Device Manager*.

b. Under the Device Manager, locate Bluetooth Radios >(delete all Bluetooth drivers)

c. Right click the device, and select Properties

d. Navigate to the Driver tab, and click the Uninstall button.  (Be sure to check the box so the driver can be deleted from the computer)

e. Hit OK and close out of the windows when it is complete.

 

5. Restart your computer


6. Plug the BTD-400 into the computer.  The drivers should install automatically.  You can now add devices by right clicking on the Bluetooth symbol on the toolbar and selecting Add a Bluetooth Device.  

Comments

0 comments

Please sign in to leave a comment.

Powered by Zendesk